Single and two-stage planetary gearmotor type: МР1-315, МР1-500, МР2-315, МР2-500, МР3-500, МР3-800
| Number of steps |
Single-stage ,Two-stage |
|---|---|
| Axis arrangement |
Coaxial |
Assignment:
Planetary gearmotors, single and double stage, MP series are designed for drives of mixing devices for chemical, medical, microbiological and other industries. They can also be used to drive general purpose machines.
Conditions of use:
- Gearmotors are designed for operation in S1 operating mode (according to GOST 183-74) with
up to 24 hours per day;
- constant and variable load within the rated torque, single direction and reversible;
- rotation of the output shafts in any direction;
- external environment - non-aggressive, non-explosive with air dustiness not exceeding 10 mg/m3;
- climatic versions - U,T (placement categories 2,3), according to GOST 15150 - 69 when working at an altitude above sea level up to 1000 m;
- The gearmotor may be operated at altitudes of more than 1000 m above sea level provided that
- requirements of GOST 183-74;
- Gearmotor motors are designed for operation from AC mains with frequency 50 Hz, nominal voltage 380 V. Gearmotors can be manufactured for other standard voltages upon agreement with the manufacturer.
Example for writing down the gearmotor designation:
Motor - gearbox MR1-500-140-2,2-G111-CU3 , wherein
MP - gearmotor type;
1- number of stages;
315 - radius of location of satellite axes, mm;
64 - output shaft speed, rpm;
18.5 - electric motor power, kW;
F-1P - mounting version;
T3 - climatic version and placement category;
Structural design by mounting method:
F-1B - vertical, output shaft downwards, with cylindrical end of output shaft;
F-2B - horizontal, with cylindrical end of output shaft;
F-1P - vertical, output shaft downwards, the end of the output shaft is made in the form of a flanged shaft.
coupling halves with integrated gear compensator;
F-2P - horizontal, with output shaft in the form of a flanged half coupling with an inbuilt toothed coupling
with a compensator;
Щ - horizontal on support legs;
Gearmotors with AIR series motors with power over 30 kW and AIM series motors with power over 30 kW
over 17kW are manufactured in vertical version only
