Planetary gear motor type: MPO1M-10, MPO2M-10, MPO2M-10, MPO2M-15, MPO2M-18

Appointment

Planetary gear motors of the MPO1M, MPO2M series designed for drives of mixing devices for chemical, medical, microbiological and other industries. They can also be used for drives of general-purpose machines.

Terms of use:

• The gear motors are designed for operation in the S1 operating mode (according to GOST 183-74) with
• working time up to 24 hours/day;
• The load is constant and variable within the rated torque, single direction and reversible;
• rotation of the output shafts in any direction;
• the external environment is non-aggressive, non-explosive with a dust content of no more than 10 mg/m3.;
• climatic versions - U,T (accommodation categories 3) according to GOST 15150 - 69 when working at an altitude of up to 1000 m above sea level.;
• The gear motor is allowed to operate at an altitude of more than 1000 m above sea level, subject to the requirements of GOST 183-74.;
• The motors of the gear motors are designed to operate from an alternating current network with a frequency of 50 Hz and a rated voltage of 380 V. In agreement with the manufacturer, it is allowed to manufacture gear motors for other standard voltages.

An example of writing a gear motor symbol:

Gear motor MPO1M-10 - VK- 5,74 -7,5 -250 - Y3 , where

MPO1M is a type of gear motor;

10 is the nominal diameter of the driver;

VK - installation version;

5.74 is the gear ratio;

7.5 - electric motor power, kW;

250 is the rotation speed of the output shaft;

U 3- climatic design and accommodation category;

Structural design according to the mounting method.

VK - vertical with a support flange, an output shaft facing down and an annular groove on it for closed

the ring transmitting axial forces;

F-2P - horizontal, flanged with a half coupling;

Sch - horizontal on the supporting legs;

F - horizontal with support flange;

B is vertical with a support flange, with the output shaft facing down.