Two-stage gearboxes - TsDN-25, TsDN-35, TsDN-40, TsDN-50
| Number of steps |
Two-stage |
|---|---|
| Axis arrangement |
Parallel |
IzhMSC plant has mastered production of reducers of CDN-25, CDN-35, CDN-40, CDN-50 types, which were produced in Soviet times at «Kiev Experimental Gear Plant». Now this plant does not exist, but the need for gearboxes of this type remains.
IzhMSC plant manufactures a line of CDN gearboxes using modern technologies of tooth machining, which can increase gearbox service life by 2 and more times. For more detailed information please contact our technical specialists. Write to the technical control department: tesh@izhmsk-prom.ru. Order a CDN gearbox: sale@izhmsk-prom.ru
Assignment
Cylindrical two-stage gearboxes with Novikov gearing horizontal general machine-building application types TsDN-25, TsDN-35, TsDN-40, TsDN-50 are designed to increase torque and reduce speed.
Application conditions of CDN gearboxes
- constant and variable load, single direction and reversible;
- operation for long periods of time or with intermittent stops, shaft rotation in any direction;
- the input shaft speed must not exceed 1500 rpm;
- ambient temperature from minus 40°C to plus 50°C;
- increased dustiness, non-corrosive environment;
- climatic versions U, T (for placement category 1...4) according to GOST 15150-69.
Notation:
- PBmax - maximum permissible cantilever load on the input shaft, kN;
- PTmax - maximum permissible cantilever load on the output shaft, kN;
- PMmax - maximum permissible cantilever load on the output shaft as part of the toothed coupling, kN.
Assembly options:
І - with shaft ends under couplings,
as part of a toothed coupling ;
ІІ - with coupling ends
|
CDN gearbox
|
||||||||||
|
Gear ratio
|
nominal
|
50,00
|
40,00
|
31,50
|
22,40
|
20,00
|
16,00
|
12,50
|
10,00
|
8,00
|
|
actual
|
48,57
|
40,17
|
31,50
|
23,34
|
20,49
|
15,75
|
12,64
|
10,35
|
8,23
|
|
