Planetary gear motor single and two-stage type: MP1-315, MP1-500, MP2-315, MP2-500, MP3-500, MP3-800

Appointment:

Planetary single- and two-stage gear motors of the MR series designed for drives of mixing devices for chemical, medical, microbiological and other industries. They can also be used for drives of general-purpose machines.

Terms of use:

• The gear motors are designed for operation in the S1 operating mode (according to GOST 183-74) with

working time up to 24 hours/day;

• The load is constant and variable within the rated torque, single direction and reversible;
• rotation of the output shafts in any direction;
• the external environment is non-aggressive, non-explosive with a dust content of no more than 10 mg/m3.;
• climatic versions - U,T (accommodation categories 2,3), according to GOST 15150 - 69 when operating at an altitude above sea level up to 1000 m;
• it is allowed to operate the gear motor at an altitude of more than 1000 m above sea level, provided that
• requirements of GOST 183-74;
• The motors of the gear motors are designed to operate from an alternating current network with a frequency of 50 Hz and a rated voltage of 380 V. In agreement with the manufacturer, it is allowed to manufacture gear motors for other standard voltages.

An example of writing a gear motor symbol:

Gear motor M1-500-140-2,2- G111-CU3 , where
MR - type of gear motor;
1- the number of steps;
315 is the radius of the satellite axes, mm;
64 - output shaft rotation speed, rpm;
18.5 - electric motor power, kW;
F-1P - installation design;
T3- climatic design and accommodation category;

Structural design according to the mounting method:

F-1B - vertical, with the output shaft facing down, with the cylindrical end of the output shaft;
F-2B - horizontal, with a cylindrical end of the output shaft;
F-1P is vertical, with the output shaft facing down, the end of the output shaft is made in the form of a flange
coupling halves with integrated gear compensator;
F-2P - horizontal, with an output shaft in the form of a flange coupling with integrated gear
the compensator;
Sch - horizontal on the supporting legs;
Geared motors with electric motors of the AIR series with a capacity of more than 30 kW and the AIM series with a capacity of
more than 17kW are manufactured only in vertical design