Three-stage gearboxes - 1TS3U
from 36850 ₽
| Number of steps |
Трёхступенчатые |
|---|---|
| Axis location |
Parallel |
Additional information on the overall dimensions of gearboxes, shafts, gear ratios, etc. is available in the catalog.
Appointment
1TS3U gearboxes cylindrical three-stage narrow horizontal general purpose They are used to increase the torques and decrease the rotational speed. Gearboxes are used in macroclimatic areas with temperate climate (version U), dry and humid tropical climate (version T), accommodation categories 1, 2, 3, 4 (outdoor work under a canopy, indoors and in rooms with controlled climate).
Conditions of use of cylindrical three-stage gearboxes 1TS3U-160, 1TSU-200, 1TS3U-250:
- the load is constant and variable, single direction and reversible;
- long-term or intermittent work;
- rotation of the shafts in any direction;
- The speed of rotation of the input shaft should not exceed 1800 rpm.;
- atmosphere of types I and II according to GOST 15150-69 with a dust content of no more than 10 mg /cubic meter.;
- climatic versions U, T for the placement category 1...3 and climatic versions UHL and O for the placement categories 4, and 1TS3U - 160 gearboxes of the climatic version XL of category 1 ...3 according to GOST 15150-69.
|
Parameter
|
Gearbox size
|
||
|
gearbox 1TSU-160
|
gearbox 1TSU-200
|
gearbox 1TSU-250
|
|
| Rated output shaft torque N*m |
1000
|
2000
|
4000
|
| Nominal radial force, N: | |||
| on the entrance shaft |
500
|
1000
|
2000
|
| on the output shaft |
8000
|
11200
|
16000
|
Assembly options:
I - with shaft ends for couplings,
in the form of a toothed coupling part and with a hollow output shaft of the 1TS3U-250 gearbox
II - with ends for couplings;
III - with hollow gearbox output shaft 1TS3U-200
Technical specifications:
| Parameter | Standard size 1TS3U | ||||
| 160 | 200 | 250 | |||
Nominal gear ratios |
31,5; 40; 45; 50; 56; 63; 80; 100; 125; 160; 200 | 16; 20; 25; 31,5; 40; 45; 50; 56; 63; 80; 100; 125; 160; 200 | |||
| Rated torque on the output shaft during continuous operation with constant load, Nm | continuous (N) PV=100% | 1250 | 2500 | 5000 | |
| Rated torque on the output shaft when the gearbox is operated in repeated short-term modes, Nm | heavy (T) PV=40% | 1600 | 3150 | 6300 | |
| average (C) PV=25% | 2000 | 4000 | 8000 | ||
| light (L) PV=15% | 2500 | 5000 | 10000 | ||
| Permissible radial cantilever load applied in the middle of the shaft seat,
Н |
The entrance | continuous (N) PV=100% | 630 | 1250 | 2240 |
| heavy (T) PV=40% | 710 | 1400 | 2500 | ||
| average (C) PV=25% | 800 | 1600 | 2800 | ||
| light (L) PV=15% | 900 | 1800 | 3150 | ||
| output | continuous (N) PV=100% | 9000 | 12500 | 18000 | |
| heavy (T) PV=40% | 10000 | 14000 | 20000 | ||
| average (C) PV=25% | 11200 | 16000 | 22400 | ||
| light (L) PV=15% | 12500 | 18000 | 25000 | ||
| EFFICIENCY | 0,96 | ||||
| Weight, kg | with cast iron body | 110 | 190 | 335 | |
| with aluminum body | 64 | – | – | ||
Notes on assemblies of standard sizes 1C3U:
- 160 with hollow output shaft is not manufactured;
- 200 with an asymmetrical hollow output shaft is manufactured according to assembly options 16, 26, 36;
- 250 with symmetrical hollow output shaft is manufactured according to assembly options 11, 12, 21, 22, 31, 32, and with a cylindrical output shaft - according to the assembly options 11, 12, 13, 21, 22, 23, 31, 32,33;
- 200, 250 with an output shaft in the form of a gear coupling are manufactured according to assembly options 11, 12, 21, 22, 31, 32;
- 250 with an output gear shaft and a parasitic gear - 11, 22, 31, 32 each.
| Standard size
1TS3U |
160 | 200 | 250 | ||
| butw3 | 160 | 200 | 250 | ||
| butw2 | 100 | 125 | 160 | ||
| butw1 | 80 | 100 | 125 | ||
| L | no more than | 630 | 775 | 950 | |
| L1 | 530 | 650 | 825 | ||
| l | 195 | 236 | 290 | ||
| l1 | 136 | 165 | 212 | ||
| l2 | 160 | 190 | 236 | ||
| l3 | 224 | 280 | 335 | ||
| H | no more than | 345 | 425 | 530 | |
| H1 | 170 | 212 | 265 | ||
| A | 475 | 580 | 750 | ||
| A1 | 140 | 165 | 218 | ||
| B | 206 | 243 | 290 | ||
| B1 | 195 | 230 | 280 | ||
| d | 24 | 24 | 28 | ||
| h | cast iron body | 24±4 | 30±4 | 32±5 | |
| aluminum housing | 28-3+4 | – | – | ||
| Type | Shaft | d | d1 | d3 | d4,
no more than |
l | l1 | b | h | t |
| gearbox 1TS3U-160 | vh | 20 | 18,2 | M12x1,25 | 40 | 50 | 36 | 4 | 4 | 2,5 |
| gearbox 1TS3U-200 | 25 | 22,9 | M16x1,5 | 45 | 60 | 42 | 5 | 5 | 3,0 | |
| gearbox 1TS3U-250 | 35 | 32,1 | M20x2,0 | 50 | 80 | 58 | 6 | 6 | 3,5 | |
| gearbox 1TS3U-160 | output | 55 | 50,90 | M36x3,0 | 88 | 110 | 82 | 14 | 9 | 5,5 |
| gearbox 1TS3U-200 | 70 | 64,75 | M48x3,0 | 100 | 140 | 105 | 18 | 11 | 7,0 | |
| gearbox 1TS3U-250 | 90 | 83,50 | M64x4,0 | 130 | 170 | 130 | 22 | 14 | 9,0 |
Dimensions of the input and output ends of the shafts
(custom shaft ends can be made).
