Single-stage gearboxes - TSU-160, TSU-200, TSU-250
| Number of steps |
Одноступенчатые |
|---|---|
| Axis location |
Parallel |
Appointment
Cylindrical, single-stage, narrow, horizontal gearboxes for general machine-building applications, types 1TSU-100, 1TSU-160, 1TSU-200, 1TSU-250 are designed to increase torque and reduce rotational speed.
Conditions of use of cylindrical gearboxes TSU-100, TSU-160, TSU-200, TSU-250:
- constant and variable load, single direction and reversible;
- long-term or intermittent operation;
- rotation of the shafts in any direction;
- the speed of rotation of the input shaft should not exceed 1800 rpm.;
- atmosphere of types I and II according to GOST 15150-69 with a dust content of no more than 10 mg /cubic meter.;
- climatic versions U, T for accommodation categories 1...3 and climatic versions UHL and O for accommodation categories 4 according to GOST 15150-69.
Technical characteristics of cylindrical gearboxes TSU-100, TSU-160, TSU-200, TSU-250
| Type | Center-to-center distance | Nominal gear ratio | Rated torque, Nm | Nominal radial load on the shaft, N | Weight no more than, kg | EFFICIENCY | |
| vh | output | ||||||
| gearbox 1TSU-100 | 100 | 2;
2,5; 3,15; 4; 5; 6,3 |
315 | 630 | 2240 | 27 | 0,98 |
| gearbox 1TSU-160 | 160 | 1250 | 1250 | 4500 | 77,5 | ||
| gearbox 1TSU-200 | 200 | 2500 | 2800 | 6300 | 135 | ||
| gearbox 1TSU-250 | 250 | 5000 (4500* ) | 4000 | 9000 | 210 | ||
* for gear ratios of 5 and 6.3.
Type |
aw | L | L1 | B | H | h | l | l1 | l2 | l3 | H1 | A | A1 | B1 | d |
| no more than | |||||||||||||||
| gearbox 1TSU-100 | 100 | 315 | 265 | 140 | 224 | 22 | 132 | 85 | 136 | 155 | 112 | 224 | 95 | 132 | 15 |
| gearbox 1TSU-160 | 160 | 475 | 412 | 185 | 335 | 28 | 195 | 136 | 218 | 218 | 170 | 355 | 125 | 175 | 24 |
| gearbox 1TSU-200 | 200 | 580 | 500 | 212 | 425 | 36 | 236 | 165 | 230 | 265 | 212 | 437 | 136 | 200 | 24 |
| gearbox 1TSU-250 | 250 | 710 | 615 | 265 | 530 | 40 | 290 | 212 | 280 | 315 | 265 | 545 | 185 | 250 | 28 |
Dimensions of the input and output ends of the shafts
(custom shaft ends can be made).
| Type | Shaft | d | d1 | d3 | d4
no more than |
l | l1 | b | h | t |
| gearbox 1TSU-100 | vh | 25 | 22,90 | M16x1,5 | 45 | 60 | 42 | 5 | 6 | 3,0 |
| gearbox 1TSU-160 | 45 | 40,90 | M30x2 | 75 | 110 | 82 | 12 | 9 | 5,0 | |
| gearbox 1TSU-200 | 55 | 50,90 | M36x3 | 88 | 140 | 82 | 14 | 11 | 5,5 | |
| gearbox 1TSU-250 | 70 | 64,75 | M48x3 | 100 | 140 | 105 | 18 | 14 | 7,0 | |
| gearbox 1TSU-100 | output | 35 | 32,10 | M20x1,5 | 50 | 80 | 58 | 6 | 5 | 3,5 |
| gearbox 1TSU-160 | 55 | 50,90 | M36x3 | 88 | 110 | 82 | 14 | 8 | 5,5 | |
| gearbox 1TSU-200 | 70 | 64,75 | M48x3 | 100 | 140 | 105 | 18 | 9 | 7,0 | |
| gearbox 1TSU-250 | 90 | 83,50 | M64x4 | 130 | 170 | 130 | 22 | 11 | 9,0 |
