<?xml version="1.0" encoding="UTF-8"? Bushing-finger couplings, toothed couplings - Izhmsk - Manufacture of gearboxes, gearmotors, gearmotors https://xn--f1adhhz.xn--p1ai/en/product-category/mufty-uprugie-vtulochno-palcevye-gost-21424-93/. Gearboxes, couplings, geared motors Wed, 13 Aug 2025 09:15:34 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://xn--f1adhhz.xn--p1ai/wp-content/uploads/2023/06/group-43.svg Bushing-finger couplings, toothed couplings - Izhmsk - Manufacture of gearboxes, gearmotors, gearmotors https://xn--f1adhhz.xn--p1ai/en/product-category/mufty-uprugie-vtulochno-palcevye-gost-21424-93/. 32 32 Toothed couplings GOST-5006-55 https://xn--f1adhhz.xn--p1ai/en/product/mufty-zubchatye-gost-5006-55/. Thu, 29 Jun 2023 14:53:02 +0000 https://xn--f1adhhz.xn--p1ai/?post_type=product&p=16323 Attention consumers! We produce special gear couplings with diameters different from standard ones upon customer requests. It is necessary to specify the required nominal torque Tkr, required overall and connection dimensions.

Сообщение Муфты зубчатые ГОСТ-5006-55 появились сначала на ИжМСК - Производство редукторов, мотор-редукторов.

]]>

Toothed couplings are manufactured in accordance with the requirements of GOST 5006-55, GOST 5006-83, GOST 5006-94, GOST R 50895-96.

Example of designation : Toothed coupling MZ - 8: gear coupling MZ - 8 with nominal transmitted torque 23600 N x m, diameters of seating holes in bushings 80 mm without end fastening on shafts.

Example of designation : Toothed coupling MZP - 8: gear coupling MZP - 8 with nominal transmitted torque 23600 N x m, diameters of seating holes in bushings 80 mm without end fastening on shafts.

Assignment: Couplings of general machine-building application for connection of coaxial shafts at transmission of torque from 710 to 375000 Nhm and reduction of dynamic loads at angular, radial and axial displacements of shafts. Parameters and dimensions of couplings correspond to GOST 5006-55.
Compensation of shaft displacements is achieved by the relative misalignment of the bushings and clips due to the lateral gaps between the teeth and the spherical surface of the bushings tooth projections. The misalignment of the axis of each bushing with respect to the axis of the cage is not more than 1°30′.

Operating Conditions:

- operation for long periods of up to 24 hours a day or with occasional stops;
- rotation speed not exceeding the value specified in the technical data table;
- spinning in either direction;
- climatic versions - У1, У2, УЗ, УХЛ-4, Т1, Т2, ТЗ and О4 according to GOST 15150.

Сообщение Муфты зубчатые ГОСТ-5006-55 появились сначала на ИжМСК - Производство редукторов, мотор-редукторов.

]]> Elastic sleeve-finger coupling GOST-21424-93 https://xn--f1adhhz.xn--p1ai/en/product/mufta-uprugaja-vtulochno-palcevaja-gost-21424-93/. Thu, 29 Jun 2023 14:43:57 +0000 https://xn--f1adhhz.xn--p1ai/?post_type=product&p=16311 Couplings of general machine-building application for connection of coaxial shafts for transmission of torque from 6.3 to 16000 Nxm and reduction of dynamic loads at angular, radial and axial displacements of shafts. Parameters and dimensions of couplings correspond to GOST 21424 elastic sleeve-finger couplings.

Сообщение Муфта упругая втулочно-пальцевая ГОСТ-21424-93 появились сначала на ИжМСК - Производство редукторов, мотор-редукторов.

]]>

Operating Conditions:

- operation for long periods of up to 24 hours a day or with occasional stops;
- rotation speed not exceeding the value specified in the technical data table;
- spinning in either direction;
- climatic versions - У1, У2, УЗ, УХЛ-4, Т1, Т2, ТЗ and О4 according to GOST 15150.

Notation:

Tkr - nominal torque, N x m
d - diameters of bushing seating holes or holes of bushings and flanged coupling halves
Isp - bushing designs:
1 - with cylindrical holes for long shaft ends according to GOST 12080;
2 - with cylindrical holes for short shaft ends according to GOST 12080;
3 - with conical holes for long shaft ends according to GOST 12081;
4 - with conical holes for short shaft ends according to GOST 12081.

Сообщение Муфта упругая втулочно-пальцевая ГОСТ-21424-93 появились сначала на ИжМСК - Производство редукторов, мотор-редукторов.

]]>